Welcome to Würth Austria For trade customers only

Exklusiv für Gewerbetreibende

Service-Hotline +43 50 8242 0

Kauf auf Rechnung

Schnelle Lieferung

Über 60.000 Produkte

2-component primer filler Multi-Fill

Primer filler, 2C Multi-Fill
PRIM-2K-MULTIFILL-400ML

Art.-no. 08932131
EAN 4046778396972

Prices for customers after login

Show availability in Würth branch offices
Exclusively for trade customers

Register now and access more than 60,000 products

2-component epoxy primer filler for optimum application safety on all metals, anodised surfaces and GFRP.

Optimal adhesion and corrosion protection properties on bare sheet metal



Excellent insulating action



Can be filled



Long application time


Approx. 4 days at 20°C



Can be covered wet-on-wet


No intermediate sanding once smoothed to a matt finish

Notice

Cannot be used over acid primers. In conjunction with PE spray filler, it is essential that the drying times are observed. After use, turn the can upside down and spray until the valve is empty. Only to be used by skilled professionals.

REGULATION (EU) 2019/1148 on the marketing and use of explosives precursors: This product is regulated by Regulation (EU) 2019/1148: All suspicious transactions, as well as the loss and theft of significant quantities, must be reported to the relevant national contact point (Federal Criminal Police Office, Office 3.3). The acquisition, introduction, possession or use of the restricted explosive precursor in question by members of the general public is subject to a restriction as set out in Article 5(1) and (3), and to a reporting obligation as set out in Article 9.
See https://www.bmk.gv.at/themen/klima_umwelt/chemiepolitik/recht/eu_vo/ausgangsstoffe-explosiv.html
Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Spot repair and painting parts



Surfaces:


  • Bare sheet steel

  • Zinc-plated sheet steel

  • Aluminium, anodised aluminium

  • UP filler

  • Old paints

  • GRFP materials: Do not use 2-component Multi-Fill with acid primers.
Instructions

The surface must be clean, dry and free from grease. Lightly sand problematic surfaces. Shake the can vigorously for 2 minutes before spraying. Take the push button (red) out of the cover cap, place on the pin on the base of the can and activate by pressing. Remove the push button and dispose of it. Shake the can vigorously again after spraying. Apply 2-3 spray coatings (70 µm) at a distance of 20-30 cm. Observe the intermediate flash-off time (5-15 minutes). Can be painted over with all common top-coat systems.



Drying times


  • Air drying: 24 hours/20°C

  • IR drying: 70 minutes/60°C

  • Oven drying: 30 minutes/60°C

Contents

400 ml

Chemical basis

Epoxy resin

Colour

Beige

Drying time

24 h

Processing time

4 d

Conditions for drying time

at 20°C

Min. flash-off time

10 min

Max. coating thickness

70 µm

Max. temperature resistance

80 °C

Min. spraying distance

20 cm

Max. short-term temperature resistance

120 °C

Min. processing temperature

20 °C

Max. spraying distance

30 cm

Shelf life from production

24 Month

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information