2-component primer filler RAPID - PRIM-SRF-(2K-RAPID)-FILLER-250ML

2-component primer filler RAPID

Name: 2-component primer filler RAPID
Brand: Würth
SKU: 5867000122

2C primer filler RAPID
PRIM-SRF-(2K-RAPID)-FILLER-250ML

Art.-no. 5867000122

EAN 4050382135759

All versions

Similar products

Prices for customers after login

2-component primer filler RAPID

Art.-no. 5867000122

Prices for customers after login

Quantity

Show availability in Würth branch offices

Exclusively for trade customers

Locate branch office
Login/Register
Call customer service: +43 50 8242 0

Universal 2-component primer filler for repairing small and medium-sized surfaces on plain steel sheeting, UP filler and old paints.

Ideally suited for repairs to minor damage

Dries quickly, is excellent to sand, smooth-running

High coat thicknesses can be applied

Excellent corrosion protection properties

Can be reworked wet-on-wet (no intermediate sanding)

Notice

In conjunction with PE spray filler, it is essential that the drying times are observed. After use, turn the can upside down and spray until the valve is empty.

REGULATION (EU) 2019/1148 on the marketing and use of explosives precursors: This product is regulated by Regulation (EU) 2019/1148: All suspicious transactions, as well as the loss and theft of significant quantities, must be reported to the relevant national contact point (Federal Criminal Police Office, Office 3.3). The acquisition, introduction, possession or use of the restricted explosive precursor in question by members of the general public is subject to a restriction as set out in Article 5(1) and (3), and to a reporting obligation as set out in Article 9.
See https://www.bmk.gv.at/themen/klima_umwelt/chemiepolitik/recht/eu_vo/ausgangsstoffe-explosiv.html

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For universal priming of bare and zinc-plated sheet steel, cleaned and sanded UP filler and old paints.

Instructions

The surface must be clean, dry and free from grease. Lightly sand problematic surfaces. Shake the can vigorously for 2 minutes before spraying. Take the push button (red) out of the cover cap, place on the pin on the base of the can and activate by pressing. Remove the push button and dispose of it. Shake the can vigorously again after spraying. Apply 2-3 spray coatings (70 µm) at a distance of 20-30 cm. Observe the intermediate flash-off time (10-15 minutes). Can be painted over with all common top-coat systems. Application time: Max. 24 hours. Drying times Air drying: 60 minutes/20°C IR drying: 10 minutes/60°C

Weight of content	238 g
Contents	250 ml
Chemical basis	Acrylic resin
Colour	Dark grey
Drying time	60 min
Processing time	24 h
Conditions for drying time	at 20°C
Max. coating thickness	70 µm
Density	1.42 g/cm³
Min. spraying distance	20 cm
Density conditions	at 20°C
VOC concentration (CH)	633 g/l
Max. spraying distance	30 cm
Shelf life from production	15 Month
Conditions to maintain shelf life from production	at 20°C

Fitting products for your order

2-component primer filler RAPID