AMO^®-Combi 7.5/11.5 window frame screw

Name: AMO ® -Combi 7.5/11.5 window frame screw
Brand: Würth
SKU: 0234030180

Amo Combi steel zinc-plated RW
SCR-(AMO-COMBI)-RW30-A2K-7,5/11,5X180
ZEBRA

Art.-no. 0234030180

EAN 4050642923690

All versions

Specification

The universal solution for attaching windows in concrete, perforated and solid brickwork and wood

For tension-free installation of windows in the reveal

The hole is drilled through the frame, if necessary an anchor for perforated block or reveal bricks is pushed through

Areas of application:

AMO Combi can be screwed directly into solid block, concrete and wood due to the hardened thread

Can be loaded immediately - no need to wait after installation

Versatile and flexible range of applications, in particular art. no.: 0234 090 250 is ideal for installing windows with frame extensions

Removable anchorage

Proof of Performance

General technical approval anchoring of windows in masonry reveals Z-21.2-2017

Test report no. 11-001214-PR01 Component test for attaching glazed plastic door in brick masonry Poroton-T8-36.5 MW. Weight of casement: 95.5 kg.

Test report no. 11-002744-PR01 Component test for attaching a two-leaf glazed plastic door in brick masonry Poroton T10. Weight of casement: 74.5 kg.

Test report no. 13-002288-PR03 Component test for attaching plastic house door in brick masonry made of ThermoPlan S9 from Mein Ziegelhaus. Weight of casement: 145 kg.

Continuous usage load 100,000 cycles.

Test report no. 11-002592-PR01 Verification of burglary-resistant properties of resistance class RC2/RC 2N in brick masonry made of Poroton-S10-P

Notice

It is important to check that the components are correctly installed for the specific construction conditions (e.g. weight of window casement, surface properties, hole pattern in the brick). Accident-proof glazing as specified in the German technical rules for safety glazing (TRAV) or DIN 18008-4 may only be attached with the AMO-Combi screw if the appropriate individual approval has been obtained before installation starts.

Drill perforated and hollow blocks with a rotary drill (without impact mechanism)

When the W-UR 10 XXL is used, the screw is no longer than the anchor and therefore reaches the second chamber in modern filled perforated bricks, ensuring that the anchor is guided correctly into the drill hole and the frame. Consequently the load-bearing capacity is not reduced.

Application area

Pre-drilling window frame

Create the drill hole

Clean the drill hole

Screw in the screw

Pre-drilling window frame

Create the drill hole

Install anchor

Screw in the screw

Pre-drilling window frame

Create the drill hole

Install anchor

Screw in the screw

General technical approval anchoring of windows in masonry reveals Z-21.2-2017

Test report no. 11-001214-PR01 Component test for attaching glazed plastic door in brick masonry Poroton-T8-36.5 MW. Weight of casement: 95.5 kg.

Test report no. 11-002744-PR01 Component test for attaching a two-leaf glazed plastic door in brick masonry Poroton T10. Weight of casement: 74.5 kg.

Test report no. 13-002288-PR03 Component test for attaching plastic house door in brick masonry made of ThermoPlan S9 from Mein Ziegelhaus. Weight of casement: 145 kg.

Continuous usage load 100,000 cycles.

Test report no. 11-002592-PR01 Verification of burglary-resistant properties of resistance class RC2/RC 2N in brick masonry made of Poroton-S10-P

Application

Application area

In brick with large cavities and solid webs or narrow and deep cavities:

AMO^® Combi + W-UR 10 XXL: anchored in at least 2 webs; burglary-resistant assembly in resistance class RC2 possible

In perforated brick with small cavities and thin webs:

AMO^® Combi + W-UR 10 XS; anchored in at least two webs

Instructions

Guidelines for planning and executing the installation of windows and house doors, 2020 edition

Art. no. 5995000000

The fixture must safely transfer all standard forces affecting the window to the structure and the foundation. The total load must therefore be calculated from e.g. the window load, wind load and live load (see DIN 1055). The currently applicable building regulations stipulate that buildings and their components must be planned in such a way that they do not endanger human life and health or pose a risk to public safety. Attachment of the windows must also comply with this criterion.

When securing window walls compliant with the former DIN 18056 standard or elements with a surface area in excess of 9 m2 and fall-proof glazing as specified in the German technical rules for safety glazing (TRAV) or DIN 18008-4, the following must be observed

The DIN 18056 standard applied to window walls with a minimum surface area of 9 m² and a minimum side length of 2 m on the shortest side. Anchors with construction product approval, European Technical Approval or with individual approval should be used for this application. Similarly, only anchors with construction product approval, European Technical Approval or with individual approval must be used to attach fall-proof glazing as specified in the German technical rules for safety glazing (TRAV) or DIN 18008-4.

Technical information


Length (l)	180 mm
Head thread length (k)	50 mm
Thread diameter (d)	7.5 mm
Material	Steel
Surface	Zinc plated
Head type	Without head
Head diameter (d(h/k))	11.5 mm
Internal drive	RW30
Drill-hole diameter in window frame (dWin)	10.2 mm
Nominal drill hole diameter	10 mm
Thread type	Dowel screw thread
Shape of tip	Tip

Performance data
	Brick format [mm]	Minimum compressive strength [N/mm²]	Screw-in depth [mm]	Free screw length [mm]	Centred tensile load [kN]	Lateral tensile load [kN]
Concrete	–	C20/25	30	15	0,7	0,7
Solid sand-lime brick e.g. Silka XL Plus	248 x 175 x 488	28,0	50	15	0,6	0,6
Hollow sand-lime brick e.g. Silka 8 DF	248 x 240 x 238	12,0	50	15	0,5	0,5
POROTON-T8-36,5-LZ-P	248 x 365 x 249	6	W-UR 10 XXL	15	–	0,4
Wood (spruce)	–	–	60	15	0,6	0,6

Characteristic values
General	Minimum Edge spacing	Concrete	c_min [mm]	50
	Minimum Edge spacing	Sand-lime brick, Solid brick, Vertically perforated brick (min. 2 walls), Softwood	c_min [mm]	60
	Minimum Screw-in depth	Concrete	h_nom,min [mm]	30
		Sand-lime brick, Solid brick		50
		Vertically perforated brick (min. 2 walls), Softwood		60
	Drill bit nominal diameter	Concrete	d₀ [mm]	6,5
		Sand-lime brick, Solid brick		6,0
		Vertically perforated brick (min. 2 walls)		10.0 in combination with W-UR 10 XS
		Vertically perforated brick (min. 2 walls with large chambers and filling), Lightweight concrete (with filling)		10.0 in combination with W-UR 10 XXL
		Softwood		No pre-drilling required
		Window frame AMO^® Combi	t [mm]	10,2
		Window frame W-UR 10 XS/W-UR 10 XXL	t [mm]	10,5
	Drill hole depth	Without anchors	h₁ [mm]	Screw-in depth + 10 mm + any existing plaster layer
		With plastic frame anchor W-UR 10 XS		Min. 80 mm
		With plastic frame anchor W-UR 10 XXL		Min. 210 mm

Documents

Product information

Datasheets (0)

Certificates/ Documents (0)

CAD data

Click here for the complete CAD library.

Accessory

Required accessory:

Product

Description

Quantity

Price
/PU

Multi-purpose drill bit MFD-S Plus

DRL-GENPURP-MFDS-PLUS-D10-L450-WL400MM

ZEBRA

Art.-no. 0641231045

Drills through virtually any material

x 1 pcs

Plastic frame anchor W-UR 10 XS W-UR 10 XS for use in perforated brick with small chambers and thin webs in conjunction with the AMO Combi screw

ANC-(W-UR10 XS)-PLA-10X70

ZEBRA

Art.-no. 0912810900

For use in perforated brick with small chambers and thin bars in conjunction with the AMO Combi screw

x 100 pcs

Plastic frame anchor W-UR 10 XXL W-UR 10 XXL

ANC-(W-UR10 XXL)-PLA-10X200

ZEBRA

Art.-no. 0912810901

For use in perforated brick with large chambers and solid bars in conjunction with the AMO Combi screw

x 100 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Additional accessory:

Product

Description

Quantity

Price
/PU