Abrasive fleece matting body For impressive surfaces, cleaning oxide coatings and removing discolouration
Sanding fleece matting body
MATBDY-FLC-G100-40X20X6MM
Register now and access more than 60,000 products
- At high rotation speeds, coarse grain acts finer, and at low speeds fine grain acts coarser
- Use tools with a low contact pressure; heavy contact pressure causes premature wear
- If there is insufficient chip removal, do not increase the contact pressure. Instead, use coarser grains
Datasheets(X)
Diameter x width x shaft diameter | 40 x 20 x 6 mm |
Max. rotation speed | 15000 1/min |
Max. recommended rotation speed | 7500 1/min |
Material to be processed | Forged steel |