Adhesive for EPDM sealing tapes DBK PLUS
Adhesive for EPDM sealing tapes
ADH-ROOFSHT-EPDM-290ML
Register now and access more than 60,000 products
Excellent adhesive properties
- Very high adhesive power on sealing tape and reveal
- Optimal adhesion on EPDM films
- Air-tight bonding allows
- installation in accordance with the German Energy Saving Regulation
Ecologically safe
- Odourless
- No emissions after hardening
- Free of solvents, isocyanates and softeners that are hazardous to health
Excellent stability
- Compound does not run off masonry "overhead application"
Even adheres to slightly damp (but not wet) surfaces
- Installation also possible in humid climates
- The surfaces must be clean, free from grease and dust and capable of bearing loads
- Standing water must be removed. For strongly absorbing surfaces, pretreatment of the surface with primer may be necessary
- Assembly on masonry: Apply DBK Plus to one side of the prepared surface in snaked beads of approx. 8 mm thickness. Lightly press on the sealing tape using a press-on roller
- Joint sealant: The joint to be sealed must at least measure 5 x 5 mm width x depth (application indoors) or 10 x 8 mm (application outdoors).
- A suitable PE back-fill material must be applied to the joint. Unable to withstand the effects of water for long periods
Datasheets(X)
For air and downpour-proof sealing of window sealing films on window and door reveals. Specially configured for bonding EPDM films in construction applications. Also suitable as joint sealant. Typical surfaces: Outstanding adhesion to most structural substrates, e.g. concrete, aluminium, tiles, wood and PVC.
Chemical basis | Hybrid polymer |
Colour | White |
Full curing speed | 2 mm/d |
Min./max. temperature resistance | -40 to 80 °C |
Shelf life from production/conditions | 12 Month / at 10°C to 20°C |
Contents | 290 ml |
Silicone-free | Yes |
Solvent-free | Yes |
Ultraviolet resistance | Yes |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!