Exklusiv für Gewerbetreibende
Service-Hotline +43 50 8242 0
Kauf auf Rechnung
Schnelle Lieferung
Über 60.000 Produkte
Brake calliper impact wrench, 3/4-inch FOR COMMERCIAL VEHICLES, MAN TGA/TGS/TGX
Brake callip. imp. wrench 3/4 in E24 TGA/TGS/TGX
E24-TX-SLOGGING-BRAKE-CAL.-WREN-3/4IN
Art.-no.
1952006765
EAN 4056807557236
Prices for customers after login
Show availability in Würth branch offices
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +43 50 8242 0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 60,000 products
Allows removal and mounting of brake calliper fastening screws when working on brake system.
- Primarily for use on front and trailing axles of commercial vehicles
- Even the most stubborn fittings can be loosened with a hammer blow to the wrench end.
- Wrench is equipped with a 3/4-inch square drive, enabling tightening in accordance with manufacturer's specifications in combination with a torque wrench.
- Removing the tie rod lever is no longer required.
Notice
Observe laser-engraved torque conversion formula (required as lever extension depends on design).
Product information
Datasheets(X)
Length | 220 mm |
Suitable for vehicle type | Atego 12-tonnes, MAN |
Product weight (per item) | 599.000 g |