Welcome to Würth Austria For trade customers only

Exklusiv für Gewerbetreibende

Service-Hotline +43 50 8242 0

Kauf auf Rechnung

Schnelle Lieferung

Über 60.000 Produkte

Butyl sealing tape

Butyl sealing tape, two-layer tape
SEALTPE-BUTYL-GREY-50X0,7MMX15M

Art.-no. 0874100401
EAN 4046778362304

Prices for customers after login

Show availability in Würth branch offices
Exclusively for trade customers

Register now and access more than 60,000 products

Butyl rubber-based, two-layer tape for permanent airtight sealing of butt joints and sleeve joints on air ducts, folded spiral seam pipes and flexible pipes in pneumatic systems

The film can take mechanical loads and is tear-proof


Screw heads can be covered without difficulty



The adhesive is odourless and contains no solvents, chlorinated hydrocarbons or aromatic hydrocarbons


No unpleasant odour during application or during subsequent operation of the plant

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

For permanent airtight sealing of butt joints and sleeve joints of air ducts, folded spiral seam pipes and flexible pipes in pneumatic systems

Instructions

The surface must be dry and free from separating agents such as grease, oil, surfactants, dirt and dust.

Adhesive base

Butyl natural rubber

Barrier layer

Foil

Backing material

PE film

Colour

Silver grey (base material)

Length

15 m

Width

50 mm

Overall thickness

0.6 mm

Thickness of butyl compound

0.52 mm

Backing material thickness

0.08 mm

Building material class/conditions

B2 - Normally inflammable / in accordance with DIN 4102

Min./max. processing temperature

5 to 40 °C

Min./max. temperature resistance

-30 to 80 °C

Free of lead ( 0.1 %)

Yes

Free of tin ( 0.1 %)

Yes

SVHC according to REACH 0.1 %

Yes

Free of chlorinated paraffins ( 0.1 %)

Yes

Solvent free ( 1 %)

Yes

Free of hydrocarbon plasticizers ( 0.1 %)

Yes

Free of halogenated blowing agents ( 0.1 %)

Yes

Free of hexabromocyclododecane ( 0.1 %)

Yes

Free of scrap tyre granules

Yes

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information