Chisel paste
Chisel grease
CHISGRSE-CU-PAST-400G
Register now and access more than 60,000 products
Assembly paste with soap-free thickener and high copper content.
- High temperature resistant, metal-enriched special paste
- For assembly and easy disassembly even at high temperatures
- For plug-in tools and wear bushings of hydraulic and compressed air hammers
- Excellent corrosion protection
- For mechanical parts operating at very low speeds and high temperatures
- Good water resistance
- High thermal capacity
- Oxidation-resistant
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of product combinations, applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
Application with spatula or brush.
Weight of content | 400 g |
Soap base | Inorganic |
Lubricant code | KF2T-35 |
Min./max. temperature conditions | -35 to 1110 °C |
Colour | Copper |
Base oil viscosity, kinematic/conditions | 485 mm²/s / at 40°C |
Min./max. worked penetration /conditions | 265 x 0.1 mm-295 x 0.1 mm / in accordance with DIN ISO 2137 |
Corrosion protection period/category | 0 - not applicable |
Shelf life from production | 48 Month |
Oil basis | Mineral oil |
Lubricant system | Paste |
Smell/fragrance | Characteristic |
Density | 0.995 g/cm³ |
Density conditions | at 20°C |
Conditions for viscosity of oil basis | at 40°C |
Min. temperature conditions | -35 °C |
Max. temperature conditions | 1110 °C |
Worked penetration conditions | in accordance with DIN ISO 2137 |
Conditions for NLGI grade | 0 - not applicable |
Corrosion protection period conditions | 0 - not applicable |
Conditions for VKA welding load | 0 - not applicable |
Silicone-free | Yes |
Acid-free | Yes |
Free from heavy metals | No |
Chloric | No |
Resistance against | Heat, Corrosion, Abrasion |