Diamond cutting disc, joint cutter
Diamond cutting disc grooving machine
CUTDISC-DIA-WINDOWJOINT-D150MM
ZEBRA
Register now and access more than 60,000 products
- Diamond cutting discs become dull at excessively high rotation speeds and wear too rapidly at insufficient circumferential speeds
- If the ease of cutting decreases (indicated by heavy sparking), resharpen the disc in abrasive material, e.g. sandstone, with several cuts
- Separate larger workpiece cross-sections into several sections (oscillating cut)
- Work without pressure—the weight of the machine is sufficient. Increased pressure causes increased wear.
- Diamond cutting discs are designed for straight cutting. Cutting curves deforms the blade and results in core cracks and segment tear-offs—risk of injury!
- Although the tool is safe, always wearsafety goggles and protective clothing while working
- Observe the information on the label (max. rotation speed!), the restrictions of use and the safety instructions
- The direction arrow on the disc must match the machine's direction of rotation
- Must not be used for lateral grinding
- Use the appropriate protective cover
- Clamping must be performed only by a trained specialist (do not use force, use clean clamping flanges of the same size, perform a test run)
- If grinding tools are clamped or used incorrectly or are damaged, they represent a danger and may cause serious injury
Datasheets(X)
Suitable for grout removal
Diameter (Ø) | 150 mm |
Drill hole | 25.4 mm |
Segment height | 8 mm |
Segment thickness | 1.9 mm |
Number of segments | 12 PCS |
Segment connection | Laser |
Max. rotation speed | 10200 rpm |
Max. circumferential speed | 80 m/s |