Drill bit countersink for AMO®-Therm Mini stand-off installation system
Push-on countersink AMO-Therm Mini
PUSHONCNTSNK-AMOTHERM-MINI-DRLR-D10/16MM
ZEBRA
Register now and access more than 60,000 products
Use only possible in conjunction with drill bit art. no. 0641231035 or art no. 0648051135
Datasheets(X)
Push the drill bit countersink onto the drill from the end of the shank until the laser marking on the drill bit is flush, then tighten.
Length | 25 mm |
Nominal drill hole diameter | 10 mm |
Spot-facer diameter | 16 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!