Engine protective lacquer - ENGPROTLAC-400ML

Engine protective lacquer

Name: Engine protective lacquer
Brand: Würth
SKU: 0892790

Engine protective lacquer
ENGPROTLAC-400ML

Art.-no. 0892790

EAN 4024835726672

All versions

Prices for customers after login

Engine protective lacquer

Art.-no. 0892790

Prices for customers after login

Quantity

Show availability in Würth branch offices

Exclusively for trade customers

Locate branch office
Login/Register
Call customer service: +43 50 8242 0

High-quality acrylic paint-based sealing of the engine compartment

New gloss on engines, assemblies, cables and hoses

Visually improving and maintaining/enhancing the value of engine compartments and assemblies

Forms a protective film

Protects from wet, dirt from the road as well as road salt, thereby preventing corrosion

Prevents leakage currents in electrical components

High degree of coating flexibility

High degree of flexibility on plastics, rubber hoses, cables etc.

Excellent temperature resistance (+80°C)

Prevents the engine protective lacquer from discolouring

Protects against softening of paints, and therefore against dust retention

Excellent adhesion to a wide variety of surfaces

High-gloss

Notice

Do not spray on painted surfaces or a hot engine.

Do not spray onto areas painted with synthetic resin.

REGULATION (EU) 2019/1148 on the marketing and use of explosives precursors: This product is regulated by Regulation (EU) 2019/1148: All suspicious transactions, as well as the loss and theft of significant quantities, must be reported to the relevant national contact point (Federal Criminal Police Office, Office 3.3). The acquisition, introduction, possession or use of the restricted explosive precursor in question by members of the general public is subject to a restriction as set out in Article 5(1) and (3), and to a reporting obligation as set out in Article 9.
See https://www.bmk.gv.at/themen/klima_umwelt/chemiepolitik/recht/eu_vo/ausgangsstoffe-explosiv.html

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Engine protective lacquer provides protection against wet conditions, dirt and salt from the road and prevents corrosion. New gloss on engines, assemblies, cables and hoses. Visually improves and maintains/enhances the value of engine compartments and assemblies. Particularly suitable for refurbishing used cars

Instructions

Shake the can well before use. Before use, thoroughly clean the areas to be treated with engine wash and allow to dry. With the ignition switched off, apply an even coat until a closed gloss film is formed. Turn the can upside down after use and spray until the valve is empty.

Chemical basis	Acetone
Contents	400 ml
Weight of content	304 g
Drying time	10 min
Conditions for drying time	at 20°C and 50% relative humidity
Dust-drying time	10 min
Max. temperature resistance	100 °C
Density	0.76 g/cm³
Density conditions	at 20°C
Grip strength	50 min
VOC concentration (CH)	95.53 %
Shelf life from production	10 Years

Fitting products for your order

Engine protective lacquer