Intumescent strip 7 KS
Intumescent strip IW
STR-(7KS)-INTUM-2X50MM-15M
Register now and access more than 60,000 products
The strip is intended for wall and ceiling ducts of flammable and non-flammable pipes with insulation made of synthetic rubber and aluminium composite piping.
- Fire resistance class up to EI 120 U/U combination partition
- Fire resistance class up to EI 240 U/U single pipe duct
- Foams in the event of fire
- Easy to install
- Does not drip in the event of fire
- Very little space requirement
- Easy to secure
Must not be additionally painted!
Datasheets(X)
For processing in single pipe ducts as an intumescent pipe sleeve. For use indoors and outdoors.
The strip can be easily cut with a knife or a pair of scissors. The side of the strip with the thicker coating must be wound around the outer wall of the pipe! The strip is wound around the non-flammable/flammable pipe or insulation in the appropriate number of layers, fixed with tape and aligned flush with the surface of the structure. For details, refer to the installation instructions.
Thickness | 2 mm |
Length | 15 m |
Width | 50 mm |
Fire resistance rating | EI120 |
Colour | Graphite grey |
Building material class | E - Normally inflammable |
Material | Glass filament |
Building material class conditions | in accordance with DIN EN 13501-1 |