Exklusiv für Gewerbetreibende
Service-Hotline +43 50 8242 0
Kauf auf Rechnung
Schnelle Lieferung
Über 60.000 Produkte
Nail anchor SHARK® Hammer TYPE FK A2
SHARK HAMMER nail anchor A2 flat collar type FK
DWL-(SHARK HAMMER)-FK-PLA-NL-A2-10-6X40
ZEBRA-SHARK
Art.-no.
590634640
EAN 4061975320339
Prices for customers after login
Show availability in Würth branch offices
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +43 50 8242 0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 60,000 products
With fast assembly and proven performance, this product offers an all-round solution for fastening light loads using push-through installation. Wall plug body with flat collar nail made from A2 stainless steel
- Quick, cost-effective installation
- Can be removed via drive in screw head
- Pre-assembled with matching screw
- Suitable for in-place installation
- Defined integrated hammer-in stop prevents premature expansion
- For countersunk and protruding finish
- Rot-resistant (plastic anchor made of high-quality polyamide)
- Resistant to UV rays
- Halogen-free
Application area
C-profile rails in dry walling
Cable ducts
C-profile rails in dry walling
Cable ducts
Product information
Datasheets(X)
Application area
- Can be used in concrete and masonry
- For any light-load fittings in interior finishing as well as wood, metal, plumbing and electrical applications, e.g. securing angle brackets, panels, metal sheets, cable ducts and any components for non-recessed installation
Anchor diameter | 6 mm |
Anchor length (l) | 40 mm |
Max. attachment height (t fix) | 10 mm |
Embedding depth (h nom) | 30 mm |
Nominal drill-bit diameter (d 0) | 6 mm |
Drill hole depth (h 1) | 35 mm |
Hole diameter in component (d f) | 6.5 mm |
Material of nail | Stainless steel A2 |
Surface | Plain |
Tightening torque (T inst) | 6 Nm |
Internal drive | Z2 |
| Performance data | |||||
| Recommended loads | Concrete C20/25 | Frec [kN] | 0,2 | 0,3 | 0,35 |
| Sand-lime brick KS 12 | 0,2 | 0,3 | 0,35 | ||
| Hollow sand-lime brick KSL 12 | 0,1 | 0,12 | 0,13 | ||
| Anchor diameter [mm] | 5 | 6 | 8 |
| Characteristic values | ||||
| Embedment depth | hnom ≥ [mm] | 25 | 30 | 40 |
| Thread dia. (THREAD type only) | dthr. [mm] | - | 6 | - |
| Thread length (THREAD type only) | Ithr. [mm] | - | 6 | - |
| Nominal drill diameter | d0 [mm] | 5 | 6 | 8 |
| Hole diameter in component | df [mm] | 5 | 6 | 8 |
| Tightening torque (THREAD type only) | Tinst [Nm] | - | 6 | - |
| Drill hole depth | h1 ≥ [mm] | 30 | 35 | 45 |