PG sheet metal puncher with splitting punch
Hole puncher splitting punch PG
HOPNCH-(PNCH-MTRX)-F.PG16-D22,5MM
Register now and access more than 60,000 products
Long service life
Specially developed rake
Three-way splitting of the material in the die - no punching waste sticks to the draw bolt; guarantees even tool wear and precise, burr-free, circular holes
Precise alignment at the cross line
Four notches on the die
- For draw bolt dia. 19.0 mm, pre-punching is alternatively possible with hole puncher size M20 (PG 13.5).
- For pre-drilling: HSS twist drill bit, art. no. 0624...
- For greasing the draw bolt: AL 1100 art. no. 0893 110 1
Datasheets(X)
Diameter | 22.5 mm |
Suitable for pipe (PG) | PG 16 |
Screw diameter x screw length | 9.5 x 50 mm |
Drill diameter | 10.0 mm |
Suitable for max. sheet metal thickness | 2 mm |
Material to be processed | GRP |
Material thicknesses that can be perforated | |||
Material | Screw dia. 6 mm | Screw dia. 9.5 mm | Screw dia. 19 mm |
St 37 | 2 | 2 | 3 |
Aluminium | 2 | 2 | 3,5 |
Copper | 2 | 2 | 3,5 |
Fibreglass | 2 | 2 | 3,5 |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!