Polyurethane foam 2K TWIST

Name: Polyurethane foam 2K TWIST
Brand: Würth
SKU: 08921440

2C frame foam Twist
DRFRMFM-2C-TWIST-BLUE-400ML

Art.-no. 08921440

EAN 4056807876160

All versions

Similar products

Prices for customers after login

Polyurethane foam 2K TWIST

Art.-no. 08921440

Prices for customers after login

Quantity

Show availability in Würth branch offices

Exclusively for trade customers

Locate branch office
Login/Register
Call customer service: +43 50 8242 0

Two-component foam for quick installation of door frames

Excellent adhesion with most standard materials used in the construction industry such as bricks, concrete, plaster, wood, metals, foamed polystyrene, hard PVC and rigid PUR foams.

NoticeUse all foam within 5 minutes after activation! Leaving the foam in the can may cause the can to break apart. Immediately after the foam has fully hardened, it should be protected against UV radiation using e.g. plaster or paints.

National Technical Assessment ITB-KOT-2017/0234 edition 1 Doors must not be installed without the use of mechanical fasteners. Deformation in mounted elements can occur if no mechanical fasteners are used.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet 1

Safety data sheet 2

Certificates/ Documents

Application areaFor the rapid installation of wooden and steel door frames, installation and sealing of window sills, installation of stair-steps, filling of large hollow spaces such as between roof beams, installation of bathtubs and shower trays and the filling of moulds.

Instructions

Clean and degrease the working substrate.

Protect surfaces exposed to accidental foam contamination.

If the packaging (can) is cold, warm it up to room temperature.

Turn the cap at the bottom of the box clockwise 5 times.

Shake the can vigorously (approx. 40 sec: 20 times upside down, then 20 times with the valve up) in order to mix the ingredients thoroughly. The uniform blue colour of the foam indicates that the ingredients have been properly mixed.

Screw the can to the applicator.

The working position of the can is the "valve down" position.

Fill the vertical slots with foam from the bottom to the top.

Do not fill the whole gap — the foam increases its volume.

Chemical basis	Two-component polyurethane
Colour	Blue
Smell/fragrance	Characteristic
Moulded density	50 kg/m³
Conditions for moulded density	at 20°C and 50% relative humidity
Cell structure	Fine
Working life	5 min
Tack-free after	7 min
Conditions for being tack-free	at 23°C and 50% humidity
Can be cut after	15 min
Conditions for ability to cut	at 23°C and 50% relative humidity
Full resilience	4 h
Conditions for full resilience	at 23°C and 50% relative humidity
Final spreading possible after	10 min
Conditions for final spreading	at 20°C and 50% relative humidity, tested in accordance with Würth test methods
Min./max. processing temperature	10 to 25 °C
Min./max. ambient processing temperature	10 to 25 °C
Min./max. surface processing temperature	10 to 25 °C
Min./max. processing temperature for can	10 to 25 °C
Min./max. temperature resistance	-40 to 80 °C
Compression strength	15 N/cm²
Compression strength conditions	at 10% compression
Min. combined tension and shear resistance	9 N/cm²
Conditions for combined tension and shear resistance	at 23°C
Min. tensile strength	32 N/cm²
Conditions for tensile strength	in accordance with DIN EN 1607
Elongation at break	10 %
Yield (volume) approx.	10 l
Conditions for yield	at 23°C and 50% humidity
Contents	400 ml
Weight of content	520 g
Building material class	B2 - Normally inflammable
Building material class conditions	in accordance with DIN 4102
Resistance against	Aging
Shelf life from production	12 Month
Conditions to maintain shelf life from production	at 5°C to 30°C

Fitting products for your order

Polyurethane foam 2K TWIST