Product categories Machining Milling End mill metal HSS

Rroughing end mill

Proizvodi
Usluge i informacije

17 stavka/e/i sa 165 pronađene/ih verzije/a

End mill HSCo-PM WN-L Z3 4xD type WR

Recommended for cutting soft to hard, long-chipping materials such as aluminium and copper alloys and thermoplastics.

7 verzije/a

Idi na verzije

End mill HSCo8 extra short WN Z4 1xD HR TiAlN

Wide range of applications on medium to high-strength materials (approx. 900-1400 N/mm²), e.g. case-hardened, heat-treated steels, tool steel alloys, hardened, non-ferrous metals, highly heat-resistant materials as well as cast iron and cast iron alloys.

6 verzije/a

Idi na verzije

End mill HSCo8 DIN 844K Z3-5 2xD type NR TiAlN

Recommended for milling difficult to machine, high-strength materials up to 1,300 N/mm² and for titanium and titanium alloys.

10 verzije/a

Idi na verzije

End mill HSCo8 DIN 845B/C type NR morse taper

Recommended for milling hard-to-machine, high-strength materials up to 1300 N/mm² and for titanium and titanium alloys.

10 verzije/a

Idi na verzije

End mill HSCo8 DIN 844K Z3-5 2xD type NR

Recommended for milling difficult to machine, high-strength materials up to 1,300 N/mm² and for titanium and titanium alloys.

10 verzije/a

Idi na verzije

End mill HSCo8 DIN 844K Z3-5 2xD type NF

Recommended for milling difficult to machine, high-strength materials up to 1,300 N/mm² and for titanium and titanium alloys.

14 verzije/a

Idi na verzije

End mill HSCo-SPM HPT DIN844K Z3-5 2xD HR TiAlN

Universal cutter with dynamic special diamond pattern profile for rough machining. Produced from new SPM substrate with very high cobalt proportion. Combining the hardness of solid carbide with the toughness of PM steel. This cutter is ideal for meeting the highest requirements in terms of cutting performance and increasing cutting volume.

8 verzije/a

Idi na verzije

End mill HSCo8 DIN 844L Z4-5 4xD type NR

Recommended for milling difficult to machine, high-strength materials up to 1,300 N/mm² and for titanium and titanium alloys.

9 verzije/a

Idi na verzije

End mill HSCo8 DIN 844K Z3-5 2xD type NR ZS

Recommended for milling difficult to machine, high-strength materials up to 1,300 N/mm² and for titanium and titanium alloys.

14 verzije/a

Idi na verzije

End mill HSCo-PM HPT DIN844K Z3-5 2xD typeHR TiAlN

Made from powder metallurgical material for use in extreme machining conditions and/or for a long tool life. Wide range of applications on medium to high-strength materials (approx. 900-1400 N/mm²), e.g. case-hardened, heat-treated steels, tool steel alloys, hardened, non-ferrous metals, highly heat-resistant materials as well as cast iron and cast iron alloys.

8 verzije/a

Idi na verzije

End mill HSCo-SPM DIN 844K Z3-6 2xD type HF TiAlN

Produced from new SPM substrate with very high cobalt proportion. Combining the hardness of solid carbide with the toughness of PM steel. This cutter is ideal for meeting the highest requirements in terms of cutting performance and increasing cutting volume in stainless steels.

10 verzije/a

Idi na verzije

End mill HSCo8 DIN 844K Z3-6 2xD type HR TiAlN

Wide range of applications for materials of medium to high strength (approx. 900-1400 N/mm²). E.g. case-hardened, heat-treated steels, tool steel alloys, hardened, non-ferrous metals, highly heat-resistant materials as well as cast iron and cast iron alloys.

17 verzije/a

Idi na verzije