Product categories Machining Milling End mill metal HSS

Shell end mill cutter

Proizvodi
Usluge i informacije

12 stavka/e/i sa 64 pronađene/ih verzije/a

Shell end mill HSCo DIN 1880 Z6-12 30° type N

Recommended for milling difficult to machine materials up to a strength of 1,300 N/mm² and rust- and acid-resistant steels, titanium alloys etc.

5 verzije/a

Idi na verzije

Shell end mill HSCo DIN 1880 Z6-10 30° type NR

Recommended for milling difficult to machine, high-strength materials up to 1,300 N/mm² and for titanium and titanium alloys.

5 verzije/a

Idi na verzije

Shell end mill HSCo DIN 1880 Z6-8 30° type NF

Recommended for milling difficult to machine, high-strength materials up to 1,300 N/mm² and for titanium and titanium alloys.

4 verzije/a

Idi na verzije

Shell end mill HSCo DIN 1880 Z6-10 type NR TiN

Recommended for milling difficult to machine, high-strength materials up to 1,300 N/mm² and for titanium and titanium alloys.

5 verzije/a

Idi na verzije

Shell end mill HSCo DIN 1880 Z8-12 type HR TiAlN

Recommended for milling difficult to machine, high-strength materials up to 1,300 N/mm² and for titanium and titanium alloys.

5 verzije/a

Idi na verzije

Shell end mill HSCo DIN 1880 Z6-8 type NF TiN

Recommended for milling difficult to machine, high-strength materials up to 1,300 N/mm² and for titanium and titanium alloys.

3 verzije/a

Idi na verzije

Shell end mill HSCo DIN 1880 Z6-10 type N TiAlN

Recommended for milling difficult to machine materials up to a strength of 1,300 N/mm² and rust- and acid-resistant steels, titanium alloys etc.

4 verzije/a

Idi na verzije

Shell end mill HSCo DIN 841 Z6-10 30° type NF

Recommended for milling difficult to machine, high-strength materials up to 1,300 N/mm² and titanium and titanium alloys.

6 verzije/a

Idi na verzije

Shell end mill HSCo DIN 841 Z10-16 20° type H

For hard, short-chipping materials such as grey cast iron, brass, bronze, alloyed tool steels.

9 verzije/a

Idi na verzije

Shell end mill HSCo DIN 841 Z6-10 1xD 30° type N

Recommended for milling difficult to machine materials up to a strength of 1,300 N/mm² and rust- and acid-resistant steels, titanium alloys etc.

10 verzije/a

Idi na verzije

Shell end mill HSCo DIN 841 Z6-8 1xD 30° type NR

Recommended for milling difficult to machine, high-strength materials up to 1,300 N/mm² and for titanium and titanium alloys.

4 verzije/a

Idi na verzije

Shell end mill HSCo DIN 1880 Z8-10 30° type HR

Recommended for milling difficult to machine, high-strength materials up to 1,300 N/mm² and for titanium and titanium alloys.

4 verzije/a

Idi na verzije

Žao nam je, ali nismo mogli da pronađemo ništa što odgovara vašoj pretrazi.

Proverite ovo ili koristite drugi termin za pretragu.

Najpopularniji proizvodi u kategoriji Shell end mill cutter

Shell end mill HSCo DIN 1880 type N

Recommended for milling difficult to machine materials up to a strength of 1,300 N/mm² and rust- and acid-resistant steels, titanium alloys etc.

1 verzija

Idi na verzije

Shell end mill HSCo DIN 1880 type NR

Recommended for milling difficult to machine, high-strength materials up to 1,300 N/mm² and for titanium and titanium alloys.

1 verzija

Idi na verzije

Shell end mill HSCo DIN 1880 type NF

Recommended for milling difficult to machine, high-strength materials up to 1,300 N/mm² and for titanium and titanium alloys.

1 verzija

Idi na verzije

Shell end mill HSCo DIN 1880 type NR TiN

Recommended for milling difficult to machine, high-strength materials up to 1,300 N/mm² and for titanium and titanium alloys.

1 verzija

Idi na verzije

Shell end mill HSCo DIN 1880 type HR TiAlN

Recommended for milling difficult to machine, high-strength materials up to 1,300 N/mm² and for titanium and titanium alloys.

1 verzija

Idi na verzije

Shell end mill HSCo DIN 1880 type NF TiN

Recommended for milling difficult to machine, high-strength materials up to 1,300 N/mm² and for titanium and titanium alloys.

1 verzija

Idi na verzije