Welcome to Würth Austria For trade customers only

Exklusiv für Gewerbetreibende

Service-Hotline +43 50 8242 0

Kauf auf Rechnung

Schnelle Lieferung

Über 60.000 Produkte

Airtight sleeve WÜTOP® socket seal
Airtight sleeve WÜTOP<SUP>®</SUP> socket seal - 1 Airtight sleeve WÜTOP<SUP>®</SUP> socket seal - 2 Airtight sleeve WÜTOP<SUP>®</SUP> socket seal - 3 Airtight sleeve WÜTOP<SUP>®</SUP> socket seal - 4
Airtight sleeve WÜTOP<SUP>®</SUP> socket seal - 1
Airtight sleeve WÜTOP<SUP>®</SUP> socket seal - 2
Airtight sleeve WÜTOP<SUP>®</SUP> socket seal - 3
Airtight sleeve WÜTOP<SUP>®</SUP> socket seal - 4

For detailed information, other images and documents, please select individual articles from the following table.

Airtight sleeve WÜTOP® socket seal

Sleeve for airtight electrical installations without a costly installation level.

See product details

Available in 2 versions

Show variants

Prices for customers after login

Show availability in Würth branch offices
Exclusively for trade customers

Register now and access more than 60,000 products

Variants

Exclusively for trade customers

Register now and access more than 60,000 products

Login/Register
Locate branch office

Call customer service: +43 50 8242 0

Prices for customers after login

Powerful-bond, solvent-free adhesive with maximum ageing resistance



Sturdy design and ample installation space for compensation of structural tolerances


  • Suitable for flat and deep cavity wall sockets

  • For socket combinations from 1x to 5x



Airtight cable and pipe entries according to DIN 4108-7, OVE guideline R7 and current EnEV


  • Lateral and rear insertion for up to three lines or one pipeline up to 25 mm in diameter

  • Maximum safety with blower door tests
NoticeWÜTOP socket seal is ideal for bonding on WÜTOP vapour barriers and WÜTOP vapour retarders and has been tested on these films. For this reason, we recommend using WÜTOP films to achieve optimum results. The application surface must be dry and free from grease, chips and dust. Porous and absorbent surfaces, such as OSB and soft particle boards etc. must be pretreated with EURASOL AdhesionPlus or primer spray.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no liability is assumed in relation to the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.