Welcome to Würth Austria For trade customers only

Exklusiv für Gewerbetreibende

Service-Hotline +43 50 8242 0

Kauf auf Rechnung

Schnelle Lieferung

Über 60.000 Produkte

RISSFILL

Repair asphalt hot mix
REPASPH-RISSFILL-BLACK-12KG

Art.-no. 0890369100
EAN 4062856468683

Prices for customers after login

Show availability in Würth branch offices
Exclusively for trade customers

Register now and access more than 60,000 products

Granulate for hot installation in potholes and cracks in the tarmac.

RISSFILL is a specially developed thermoplastic for repairing cracks and smaller potholes (max. depth 5 cm; max. diameter 20 cm).



  • Prevents the formation of large potholes

  • Repair time is approx. 20 min. – from the start of work to opening the road to traffic

  • Heating up to approx. 220°C results in excellent connection with the bitumen in the tarmac

  • Spreading hot thermoplastic with anti skid materials– anti-slip surface, no ghost marks

  • Can be used all year round
Notice

Storage at temperatures up to max. 30°C.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given was part of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

For repairing potholes with a max. depth of 5 cm, natural cracks and joints in the tarmac.

Instructions

Installation instructions:



1. Thoroughly remove dust and loose dirt in the area of application.


2. Pre-heat the application area with a gas burner.


3. If the granulate is pressed into one piece in the bag, drop the bag from max. 50 cm in height to loosen it.


4. Fill a layer of RISSFILL of max. 15 mm into the application area and heat it to approx. 200°C with the gas burner.



Note: If the area of application is not sealed, repeat point 4.



5. To ensure that there is definitely slip resistance and that no ghost marks are produced on roads, scatter the last hot layer of RISSFILL with grit.


6. After the RISSFILL has cooled, check the strength of the surface with a heat-resistant glove before opening the road to traffic.

Weight of content

12 kg

Chemical basis

Quartz sands/cements

Colour

Black

Min./max. processing temperature

-40 to 60 °C

Min. ambient processing temperature

-40 °C

Max. ambient processing temperature

60 °C

Min. processing temperature

-40 °C

Max. processing temperature

60 °C

Density

2 g/cm³

Density conditions

at 15°C, 50% relative humidity

Shelf life from production

3 Years

Conditions to maintain shelf life from production

cool and dry storage area, in sealed original container

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information