Exklusiv für Gewerbetreibende
Service-Hotline +43 50 8242 0
Kauf auf Rechnung
Schnelle Lieferung
Über 60.000 Produkte
Sealing plastering border With membrane
Thermal reveal bead with membrane/mesh
THERMRVLBEAD-MSH-MEMBR-EX-140X25-L2,6M
Register now and access more than 60,000 products
High-quality two-part PVC sealing plaster stop beads with integrated membrane for increased absorption of movement, to ensure a neater finish.
Tested sealing properties over 600 Pa, BG1 in accordance with DIN 18542.
Outer side vapour-permeable and certified as resistant to driving rain. Inner side airtight with vapour-retardant properties.
High absorption of movement confirmed by ift Rosenheim component testing.
See test report no. 10-000417-PR05 by ift Rosenheim.
Plaster stop beads cannot be mixed up.
Red for interior airtight and vapour-blocking applications and green for exterior vapour-permeable applications.
Special perforated plastering leg.
Optimum anchorage and two smoothing edges ensure quick and consistent use of the plaster stop beads.
Quick and safe masking.
Tear-off cover tabs with integrated adhesive tape for application of PE protective films.
This information is intended to advise you to the best of our knowledge, based on our tests and experience. However, due to the large number of applications and the storage and handling conditions that lie outside the scope of our influence, we assume no liability for the application results in individual cases. This also applies to the use of the non-binding technical and commercial customer service provided by us. We always recommend that you conduct your own tests. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
Areas of application
Perfect, crisp edge between window or door elements and the interior or exterior façade. For use with all conventional plaster systems. Ideal for renovation work.
Function
The innovative membrane ensures much higher absorption of movements and so also significantly improves the visual appearance.
Installation instructions
- Clean surface of oil, grease and any loose material
- Cut plaster stop bead to the correct dimensions
- Mitre corner joints and stick together using sealant (DBK Plus)
- Remove protective film and apply adhesive to the entire plaster stop bead. Stick mitre joints together using sealant (DBK Plus)
- Do not use at ambient or surface temperatures below +5°C
Material of profile | PVC |
Width | 25 mm |
Length | 2.6 m |
Material of mesh | Fibre glass |
Fabric type | ETICS fabric |
Building material class | B1 - Of low flammability |
Ultraviolet resistance | Yes |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!