• Excellent adhesion on tiles for ensuring secure sealing of tile joints


• High degree of resistance to chemicals¹⁾


• Good smoothing properties


• Permanently elastic


• Building material class B2 according to DIN 4102


• Fungicidal. Sealant protects itself against mould and algae

Tested in accordance with EN 15651 Parts 1, 2, 3

• Fire behaviour: Class E


• Stability under load: < 2 mm


• Resetting properties: > 70 %


• Volume loss: < 10 %, for art. no. 0892 215: < 20 %


• Adhesion/expansion on exposure to heat, water and artificial light: Passed


• Durability: Passed


• Tensile properties at -30 °C: : < 0.9 MPa


• Tensile behaviour under pre-stress at -30 °C: Passed

EMICODE EC1plus: Very low emissions - the EMICODE classification system awards labels to construction products that comply with the very stringent health and environmental requirements of recognised institutes. The lowest-emission products bear the EC1plus mark.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.