Sleeve cone
Intent cone
CNU-FORMWRK-PLA-(F.SPCEPIP)-ID22-ED39MM
Register now and access more than 60,000 products
- Removed after stripping
- Reusable multiple times
- Material: regranulated HDPE
Datasheets(X)
Plugged into spacer tube. The spacer tube must be cut 2 cm shorter than the wall thickness. The sleeve cone is removed after stripping and can be reused. The spacer tube is then sealed with a plug.
Min. diameter | 22 mm |
Length | 10 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!