Spring toggle type W-FKW with centring plug
Spring-loaded anchor W-FKW
DWL-(W-FKW)-140-M10X180
Register now and access more than 60,000 products
- The spring toggle expands automatically in any position
- The design of a spring toggle means it does not need to be inserted as deeply in a cavity as a toggle anchor
- Fully pre-assembled
- Anti-rotation lock (claws) prevents movement during installation
- Load distributed over large surface area to ensure good holding power
Datasheets(X)
For fastening washbasins, wall-hung toilets, boilers, urinals, load-bearing structures, etc. to hollow walls, service ducts. The centring plug is used to fill the drill hole and to centre the threaded rod.
Type description | W-FKW |
Anchor diameter | 10 mm |
Anchor length (l) | 180 mm |
Hole diameter in component (d Bau) | 14 mm |
Minimum cavity depth (h) | 90 mm |
Nominal drill-bit diameter (d 0) | 30 mm |
Max. attachment height (d a) | 140 mm |
Material | Steel |
Surface | Zinc plated |
Design | Rubber spacer, collar and hexagon nut |
Breaking force of the anchor (F failure) | 11 kN |
Thread type | Metric thread |