Submersible pump Easy-Sub 400W
Submersible pump Easy-Sub 400W
SUBMPMP-(EASY-SUB)-400W
Register now and access more than 60,000 products
- Grain size up to 10 mm
- Cable length 20 m + safety plug
- Fully submersible to 3 bar
- Longitudinally water-tight cable entry protects the winding from water ingress
- Prevents the motor from overheating on rotor blocking, unequal phases, voltage fluctuations
- Low-wear F-impeller (free current vortex)
- Incl. Storz C-coupling
Datasheets(X)
Draining ditches, shafts and containers, drainage systems and water removal
Max. feed quantity | 220 l/min |
Max. delivery height | 11.5 m |
Weight of machine | 13 kg |
Connection coupling | Storz C |
Min./max. temperature conditions | 0 to 40 °C |
Residual water height | 88 mm |
∅ pressure joint | 2 inch | ||
Performance data | |||
Feed medium | Type of medium | Wastewater up to 10 mm grain size | |
Temperature | 0–40°C | ||
Pump | Components | Impeller | F-impeller (free flow vortex) |
Shaft seal | Double slide ring seal with additional shaft sealing ring | ||
Material | Impeller | Polyurethane | |
Housing | Grey cast iron | ||
Installation unit | Stainless steel VA (1.4301) | ||
Slide ring seal | Coal against ceramic | ||
Engine | Design | Fully submersible, IP 68 wet installation | |
Voltage | 230 V | ||
Motor protection (installed) | Thermal protection | ||
Material | Housing | Stainless steel VA (1.4301) | |
Shaft | Stainless steel VA (1.4024) | ||
Cable | Rubber, H07 RN-F (20 m) | ||
Pressure outlet | Threaded connection Storz C |