Zinc cleaner
Zinc cleaner
METCLNR-ZINK-1LTR
Register now and access more than 60,000 products
Particularly for cleaning and degreasing fresh galvanised surfaces
- Prevents adhesion problems
- Paint adheres even better thanks to top coat activation
Wide range of uses, suitable for preparing hot-dip galvanised, spray-galvanised and electrolytically galvanised surfaces
For coating galvanised surfaces, only use tempering materials specially recommended for galvanised surfaces. Alkyd resin-based coating materials are generally unsuitable.
Würth zinc cleaner is suitable for preparing hot-dip galvanised, spray-galvanised and electrolytically galvanised surfaces.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
Zinc cleaner is suitable for preparing hot-dip galvanised, spray-galvanised and electrolytically galvanised surfaces. Galvanised and freshly galvanised surfaces.
Mix 1:1 with water. Spray galvanised surfaces and wet-sand with sanding fleece. Allow the resulting metallic grey suspension to soak in for 10 minutes and then sand again. Then wash off thoroughly with water.
Contents | 1 l |
Container | Round bottle |
Smell/fragrance | Characteristic |
Colour | Transparent |
Chemical basis | Ammoniacal surfactant |
Shelf life from production | 36 Month |
Density/conditions | 0.999 g/cm³ / at 20°C |
AOX-free | Yes |