Primer spray High Tack

For detailed information, other images and documents, please select individual articles from the following table.

Primer spray High Tack

Name: Primer spray High Tack
Brand: Würth
SKU: 31233004070204

Sprühbarer Haftvermittler mit sehr hohem Anfangstack zur Haftverbesserung von Acrylat–, Butyl– und Bitumenklebebändern auf mineralischen und saugenden Untergründen.

See product details

Show similar products

Available in 2 versions

Show variants

Prices for customers after login

Show availability in Würth branch offices

Exclusively for trade customers

Register now and access more than 60,000 products

Locate branch office
Login/Register
Call customer service: +43 50 8242 0

Variants

You can refine your search by selecting different attributes

Art.-no.

1

Exclusively for trade customers

Register now and access more than 60,000 products

Login/Register

Locate branch office

Call customer service: +43 50 8242 0

Prices for customers after login

Description
Usage

Verbesserung der Haftung, mit sehr hohen Anfangstack

Significantly improves the reliability of the bond by forming a stable film on the surface

Rough and porous substrates are consolidated

Einfaches Aufbringen durch Aufsprühen mit Applikationspistole

NoticeThe surface must be dry and free from dust or grease. Farbreste, Imprägniermittel entfernen. Lacke, Farben und Kunststoffe können angelöst werden. Compatibility with adjacent materials must be tested. Nur in gut belüfteter Umgebung verwenden. Nicht geeignet für die Verklebung von weichmacherhaltigen Produkten.

REGULATION (EU) 2019/1148 on the marketing and use of explosives precursors: This product is regulated by Regulation (EU) 2019/1148: All suspicious transactions, as well as the loss and theft of significant quantities, must be reported to the relevant national contact point (Federal Criminal Police Office, Office 3.3). The acquisition, introduction, possession or use of the restricted explosive precursor in question by members of the general public is subject to a restriction as set out in Article 5(1) and (3), and to a reporting obligation as set out in Article 9.
See https://www.bmk.gv.at/themen/klima_umwelt/chemiepolitik/recht/eu_vo/ausgangsstoffe-explosiv.html

Application areaFür die Vorbehandlung des Untergrunds bei der Verarbeitung von Würth Acrylat–, Butyl– und Bitumenklebebändern. Applying primer is required on porous and absorbent surfaces, such as concrete, gypsum, wood, masonry, aerated concrete, plaster, hardened cement paste etc., for optimum adhesion.

Instructions

Shake well before use. Connect the spray gun to the tank via the hose. Open the valve fully. Hold the spray gun or the spray nozzle of the can approx. 10 centimetres away from the surface and apply the primer evenly. The spray width can be adjusted using the adjusting screw on the spray gun or the spray nozzle on the can. For difficult and absorbent substrates, a second application is recommended. Shut off the spray gun after use. Leave the valve open and place the hose around the tank. Only close the valve again once the tank is empty and needs replacing. Allow the primer to dry for a minimum of 3 minutes. When using the primer to bind two surfaces (e.g. bonding two polystyrene panels, etc.) both surfaces must be sprayed. When touching the surfaces, ensure that there is no primer remaining on your fingers before both surfaces are bound together. The open time of the sprayed area must be limited to 1 hour to avoid potential contamination. Adjacent surfaces must be protected against contamination.

Tank disposal:

Completely empty the tank, close the valve and remove the hose. Open the valve and allow vapours to escape fully in a well-ventilated area. Strike the now unpressurised tank at the predetermined breaking point (circular depression on the shoulder of the tank) using a hammer and a pricking awl (use non-spark material). Dispose of the tank in accordance with applicable regulations.

Primer spray High Tack

Variants

Thought about these?